Communication Mode: | Full-Duplex & Half-Duplex |
---|---|
Type: | Ethernet Switch |
Transmission Rate: | 2.5g |
Ports: | 24 |
Mac Address: | 32K |
Routing Table: | 16K |
Customization: |
---|
Suppliers with verified business licenses
Product Overview
S5750M-30X-P-SI full 2.5G routing PoE switch provides high availability, scalability, security, energy efficiency, and ease of operation with rich features such as VSF(Virtualized Switching Framework), IEEE 802.3at/ IEEE 802.3bt and redundant power supplies. It is ideal for WiFi6 AP access scenes in campus networks.
Key Features and Highlights
Ready for Wi-FI 6
S5750M-30X-P-SI has 24 2.5Gbps ports and also supports Power over Ethernet (PoE), including PoE+ and 60W PoE. Certainly it is good for 802.11ac and 802.11ax wireless LAN applications and helps you avoid having to run multiple cables between switches and access points and let your networks welcome next-generation traffic speeds and data rates.
Carrier-class reliability
S5750M-30X-P-SI provides 4 10 Gigabit and also 2 40G uplink ports which could be designed to offer redundant uplinks with various ring protection applications, effectively raised the expansibility and performance of the network.
S5750M-30X-P-SI supports redundant hot-swappable power supplies and built-in lightning protection technology. All the ports provides 8KV-10KV lightning protection capability which greatly reduces the damage rate of equipment from lightning.
G.8032 provides sub-50ms protection and recovery switching for Ethernet traffic in a carrier ring topology.
VSF (Virtual Switch Framework)
Virtual Switch Framework can virtualize multiple DCN switches into one logical device, achieving the sharing of information and data tables between different switches. The performance and ports density of virtualized devices is greatly enlarged by times under VSF. VSF also simplifies management work for the network administrator and provides more reliability.
Rich L3 Features
S5750M-30X-P-SI delivers high-performance, hardware-based IP routing, RIP, OSPF, and BGP provide dynamic routing by exchanging routing information with other Layer 3 switches and routers. With S5750M-30X-P-SI, customers could easily achieve Policy-based Route (PBR), which is important when they need a multi exit application.
Strong Multicast
S5750M-30X-P-SI supports abundant multicast features. In Layer 2, such as IGMPv1/v2/v3 snooping and fast leave. L3 multicast protocols such as IGMPv1/v2/v3, PIM-DM, PIM-SM, PIM-SSM, and even MSDP. With Multicast VLAN Register (MVR), multicast receiver/sender control and illegal multicast source detect functions; S5750M-30X-P-SI provides a great application experience for the customer.
Comprehensive QoS
With 8 queues per port, S5750M-30X-P-SI enable differentiated management of up to 8 traffic types. The traffic is prioritized according to IEEE802.1p, DSCP, IP precedence, and TCP/UDP port number, giving optimal performance to real-time applications such as voice and video.
S5750M-30X-P-SI also supports Bi-directional rate-limiting, per port or traffic class preserves network bandwidth, and allows full control of network resources.
Abundant IPv6 Support
S5750M-30X-P-SI supports IPv6 switching and routing based on hardware for maximum performance. With increased network devices growing the need for larger addressing and higher security become critical, S5750M-30X-P-SI will be the right product to meet this requirement.
Item |
S5750M-30X-P-SI |
Physical port |
24 x 100/1000M/2.5GBaseT + 4 x 10GE(SFP+) + 2 x 40G(QSFP+) Auto MIDX |
Management port |
100/1000M BaseT RJ45 Ethernet Management port |
Console port (RJ45) |
|
Reset port |
|
USB2.0 interface |
|
Performance |
|
Switching Capacity |
360Gbps |
Forwarding Rate |
267.84Mpps |
MAC Address | 32K |
Routing Table |
16K |
L3 Interface |
Max 1K |
Physical |
|
Dimension (W*H*D) | 440mm*44mm*380mm |
Relative Humidity | 5%~95% non-condensing |
Temperature | Working 0°C~45°C, storage -40°C~75°C |
Power Supply | 2 power slots, 1+1 Modular Redundant (standard with 1 AC) |
PoE |
IEEE 802.3af (15.4W) IEEE 802.3at (30W) IEEE 802.3bt (60W) (the first 8 ports) Total PoE power: 530W(1 PSU) or 1060W(2 PSUs) |
Main Features |
|
L1, L2 Features |
IEEE802.3(10Base-T), IEEE802.3u(100Base-TX), IEEE802.3z(1000BASE-X), IEEE802.3ab(1000Base-T), IEEE 802.3bz(2.5GBase-T), IEEE802.3ae(10GBase), IEEE802.3x, IEEE802.3ak(10GBASE-CX4), IEEE802.3ba(40GBASE-X) |
Port loopback detectionLLDP and LLDP-MEDUDLDIEEE 802.3ad LACP, max 128 group trunks with max 8 ports for each trunk
LACP load balance ERPS (G.8032) |
|
N:1 Port Mirroring RSPAN |
|
IEEEE802.1d(STP) IEEEE802.1w(RSTP) IEEEE802.1s(MSTP) Root Guard BPDU Guard BPDU Tunnel |
|
IEEE 802.1Q, 4096 VLAN MAC VLAN, Voice VLAN, PVLAN, Protocol VLAN, Multicast VLAN QinQ, Selective QinQ, Flexible QinQ GVRP N:1 VLAN Translation Broadcast / Multicast / Unicast Storm Control |
|
IGMP v1/v2/v3 Snooping and L2 QueryND Snooping
MLDv1/v2 Snooping |
|
Port Security |
|
Flow Control: HOL, IEEE802.3xBandwidth Control | |
L3 Features | Static Routing, RIPv1/v2, OSPFv2, BGP4OSPFv3, BGP4+OSPF multiple processesPolicy-based routing (PBR) for IPv4 and IPv6VRRPURPF,ECMPBFD |
IGMP v1/v2/v3, IGMP Proxy,DVMRP, PIM-DM, PIM-SM, PIM-SSM, Anycast RP, MSDPStatic Multicast RouteMulticast Receive ControlIllegal Multicast Source Detect | |
ARP Guard, Local ARP proxy, Proxy ARP, ARP Binding, Gratuitous ARP, ARP LimitAnti ARP Cheat, Anti ARP Scan | |
DNS Client, DNS Relay | |
ICMPv6, ND, DNSv6IPv6 Policy-based Routing (PBR)IPv6 VRRPv3, IPv6 URPF, IPv6 RARIPng, OSPFv3, BGP4+MLD Snooping, IPv6 Multicast VLANMLDv1/v2, PIM-SM/DM for IPv6, IPv6 Anycast RP, IPv6 ACL, IPv6 QoS | |
QoS | 8 QueuesSP, WRR, SWRR, WDRR, SWDRRWREDTraffic Classification Based on 802.1p COS, ToS, DiffServ DSCP, ACL, port numberTraffic PolicingPRI Mark/Remark |
ACL | IP ACL, MAC ACL, IP-MAC ACLStandard and Expanded ACL Based on source/destination IP or MAC, IP Protocol, TCP/UDP port, DSCP, ToS, IP Precedence), VLAN, Tag/Untag, CoSRedirect and StatisticsRules can be configured to port, VLANTime Ranged ACL |
Security | IEEE 802.1x AAAPort, MAC-based authenticationAccounting based on time length and trafficGuest VLAN and auto VLAN |
RADIUS for IPv4 and IPv6 | |
TACACS+ for IPv4 and IPv6 | |
MAB | |
DHCPv4/v6 | DHCP Server/Client for IPv4/IPv6DHCP Relay/Option 82DHCP Snooping/Option 82 |
Traffic Monitor | sFlow Traffic Analysis |
Security Network Management | CLI, WEB, Telnet, SNMPv1/v2c/v3 through IPv4 and IPv6Syslog and external Syslog ServerHTTP SSLSNMP MIB, SNMP TRAPFTP/TFTPSNTP/NTPRMOM 1,2,3,9Authentication by Radius/TACACSSSH v1/v2Dual firmware images/ Configuration files802.3ah OAM, 802.1ag OAM |
Data Center Features | VSF (Virtual Switch Framework) |
Gigabit access with 10G uplink in a campus network
Ideal switch to support access points, cameras. IEEE 802.3bt ready for Wi-Fi 6
Ordering Information
Product |
Description |
S5750M-30X-P-SI | Full 2.5G PoE Ethernet Routing Switch, 24 x 100/1000M/2.5G BaseT + 4 x 10GE(SFP+) + 2 x 40G(QSFP+) ports, modular power (2 power modules at most, 1+1 redundancy. Standard with 1 AC power module), up to 1060W for PoE(2 PSUs) |
M5750-AC-B | AC power supply, 600W, fit for S5750M-30X-P-SI |
Suppliers with verified business licenses