| Customization: | Available |
|---|---|
| Type: | Access Point |
| Work Mode: | AP |
Suppliers with verified business licenses
W39AP Pro adopts the new generation WiFi6 technology, with160MHz channel bandwidth, dual-band concurrent wireless rate up to 3000Mbps. Pro-6-IW is designed to meet every network need in downloading, VR games, cloud gaming, etc. It can deliver simultaneous high-speed internet access to 80 devices.
Two omni-directional independent antennas, equipped with a 4-way FEM signal amplifier. Compared with other ordinary APs, wireless signal transmission and reception capacity is increased by 2 times, which can easily cover 250sqm villa/large suite. Unique antenna design effectively reduces co-channel interference and makes the WiFi signal more stable.
With a unified SSID for the whole house, the internet device automatically connects to the AP node with the best signal, and latency is low to 50ms. Wherever you go, the wireless speed is always smooth and stable.
Standard 86 type panel design with high scene adaptation. For installation, simply remove the original AP and replace it with W39AP Pro, no rewiring is required and no damage is done to the original wall surface.
The W39AP Pro can be installed with a double-sided tap on the back, plug in the cable and the AP will be attached to the original network port panel. The location is flexible and it can be installed in a bedroom, study or balcony.
W39AP Pro provides a separated IPTV port, which is connected to STB box, avoiding the trouble of laying network cables.
| Product Information | |
|---|---|
| Model | W39AP Pro |
| Category | In Wall |
| Dimensions | 86*86*32 mm |
| Hardware Specifications | |
| Frequency band | 2.4 GHz, 5 GHz |
| Wireless standards | IEEE 802.11a/b/g/n/ac/ax |
| 2.4 GHz data rate | 1-574 Mbps |
| 5 GHz data rate | 6-2402 Mbps |
| Channel width | 20 MHz/40 MHz/80 MHz/160MHz |
| MU-MIMO | 2X2 MU-MIMO |
| Ethernet port | One 1000 Mbps LAN Port (PoE) One 1000 Mbps LAN Port |
| Button | 1*Reset |
| LED indicator | Bi-Color LEDs |
| Max. power consumption | 8.5W |
| Power supply standard | IEEE 802.3af PoE, DC 12V 1A |
| Max. connected clients | 256 |
| 2.4 GHz Antenna gain | 4 dBi |
| 5 GHz Antenna gain | 5 dBi |
| Transmission Power | CE:<20 dBm(2.4 GHZ, EIRP) <23 dBm(5 GHZ, EIRP) FCC:<26 dBm (2.4 GHz) <26 dBm (5 GHz) 21+/1.5dBm 23+/1.5dBm |
| 2.4 GHz 802.11b RX sensitivity | -95.5 dBm |
| 2.4 GHz 802.11n (MCS7) RX sensitivity | -72.5 dBm |
| 5 GHz 802.11a RX sensitivity | -97.5 dBm |
| 5 GHz 802.11n (MCS7) RX sensitivity | -77.5 dBm |
| Software Specifications | |
| Operating mode | AP, Client+AP |
| Hide SSID | Supported |
| Max. No. of SSID | 2.4 GHz: 8 5 GHz: 8 |
| OFDMA | Supported |
| Beamforming | Supported |
| TWT | Supported |
| 802.11k/v/r | Supported |
| WEP | Supported |
| WPA-PSK | AES/TKIP |
| WPA2-PSK | AES/TKIP |
| WPA3-SAE | AES |
| WPA | Supported |
| WPA2 | Supported |
| Access control | MAC address-based |
| Adjustable power transmit | Supported |
| Frequency analysis | Supported |
| AP isolation | Supported |
| Connected clients control | Supported |
| Weak Signal Client Limitation | Supported |
| Prefer 5 GHz | Supported |
| WMM | Supported |
| VLAN tagging for SSID | Supported |
| LED indicator control | Supported |
| Diagnostics tool | Ping |
| Scheduled reboot | Supported |
| Reboot at specified interval | Supported |
| Device management | Web management, controller management, cloud platform management, APP management |
| System logs | Supported |
| Firmware Upgrade | Local and AC upgrade |
| Reboot | Local and AC reboot |
| Reset | Local and AC reset |
| Backup configuration | Supported |
| Restore configuration | Supported |
| Operating Environment | |
| Default login IP address | 192.168.0.254 |
| Default user name | admin |
| Default password | admin |
| Operating temperature | -10ºC - 40ºC |
| Operating humidity | (10% - 90%) RH, non-condensing |
| Storage temperature | -30ºC - 70ºC |
| Storage humidity | (5% - 90%) RH, non-condensing |
){kind=link}