Customization: | Available |
---|---|
Communication Mode: | Full-Duplex & Half-Duplex |
Type: | Ethernet Switch |
Suppliers with verified business licenses
DCN S5750E Series Layer3 10G Ethernet Network Routing Switch
DCN S5750E series switch is full fiber stackable routing switches with fixed, built-in 10GbE uplink ports. These fully managed switches provide high availability, scalability, security, energy efficiency, and easy operation with rich L3 features. It is ideal for aggregation or access layer for campus, enterprise, government and service provider networks.
Key Features and Highlights
Performance and Scalability
With high switching capacity and all non-blocking ports, S5750E(R2) series support wire-speed L2/L3 forwarding and high routing performance for IPv4 and IPv6 protocols.
The 10 Gigabit Ethernet connectivity of S5750E(R2) is accomplished via a hot-pluggable 1 Gigabit SFP or 10 Gigabit SFP+ transceiver which supports distance up to 300 meters over multimode fiber and 10 to 40km over single-mode fiber (The distance depends on the optical module chosen).
VSF (Virtual Switch Framework)
Virtual Switch Framework can virtualize multiple DCN switches into one logical device, achieving the sharing of information and data tables between different switches with max 16 units for stacking. The performance and ports density of the virtualized device is greatly enlarged by times under VSF, 160Gbps total stack bandwidth. VSF also simplifies management work for the network administrator and provides more reliability.
Rich L3 Features
S5750E(R2) series delivers high-performance, hardware-based IP routing. RIP, OSPF, and BGP provide dynamic routing by exchanging routing information with other Layer 3 switches and routers. With S5750E(R2) series, customers could easily achieve Policy-based Route (PBR), which is important when they need a multi exit application.
Strong Multicast
S5750E(R2) series supports abundant multicast features. In Layer 2, such as IGMPv1/v2/v3 snooping and fast leave. L3 multicast protocols such as IGMPv1/v2/v3. With Multicast VLAN Register (MVR), multicast receiver/sender control and illegal multicast source detect functions; S5750E(R2) series provides a great application experience for the customer.
High-Reliability network
MRPP is a Multi-layer Ring Protection Protocol, which is DCN's private fast Ethernet ring protocol. Comparing to spanning tree protocol, it has the advantages of fast convergence, simple protocol calculation, fewer system resources cost, and so on, which can improve the reliability of Ethernet network operation.
Comprehensive QoS
With 8 queues per port, S5750E(R2) series enable differentiated management of up to 8 traffic types. The traffic is prioritized according to IEEE802.1p, DSCP, IP precedence, and TCP/UDP port number, giving optimal performance to real-time applications such as voice and video.
S5750E(R2) series also supports Bi-directional rate-limiting, per port or traffic class preserves network bandwidth, and allows full control of network resources.
Abundant IPv6 Support
S5750E(R2) series supports IPv6 switching and routing based on hardware for maximum performance. With increased network devices growing the need for larger addressing and higher security become critical, S5750E(R2) series will be the right product to meet this requirement.
Specificationstem
Item |
S5750E-16F-SI-D |
S5750E-28F-SI-D |
S5750E-52F-SI-D |
||
Physical port |
8 x 100/1000Base-X (SFP) + 4 x GE Combo (RJ45/SFP) + 4 x 10GbE (SFP+) Auto-MIDX |
16 x 100/1000Base-X (SFP) + 8x GE Combo (GT/SFP) + 4 x 10GE(SFP+) Auto-MIDX |
48 x 100/1000Base-X (SFP) + 4 x 10GbE (SFP+) Auto-MIDX |
||
Management port |
1 x RJ45 Ethernet Management port |
||||
1x Console port |
|||||
1x USB2.0 interface |
|||||
lighting protection level: 2KV |
|||||
Performance |
|||||
Switching Capacity |
112Gbps |
128Gbps |
176Gbps |
||
Forwarding rate |
83Mpps |
95Mpps |
131Mpps |
||
Jumbo Frame |
10K |
10K |
10K |
||
MAC Address |
16K |
16K |
16K |
||
ARP Table |
4K |
4K |
4K |
||
Routing Table |
1K |
1K |
1K |
||
ACL Table |
1K |
1K |
1K |
||
Physical |
|||||
Dimension (W*H*D) |
330mm x 44mm x 230mm |
440mm x 44mm x 240mm |
440mm*44mm*320mm | ||
Relative Humidity | 5%~95% non-condensing | ||||
Temperature | Working 0°C~50°C, storage -40°C~70°C | ||||
Power Supply | AC:100~240VAC, 50~60Hz + 12VDC RPS | AC:100~240VAC, 50~60Hz + 48V DC | AC:100~240VAC, 50~60Hz + 12VDC RPS | ||
Power Consumption | <22W | <34W | <60W | ||
Main Features |
|||||
L1, L2 Features |
IEEE802.3(10Base-T), IEEE802.3u(100Base-TX), IEEE802.3z(1000BASE-X), IEEE802.3ab(1000Base-T), IEEE802.3ae(10GBase), IEEE802.3x, IEEE802.3ak(10GBASE-CX4) |
||||
Port loopback detectionLLDP and LLDP-MEDUDLD802.3ad LACP, max 128 group trunks with max 8 ports for each trunkLACP load balanceERPS (G.8032) | |||||
N:1 Port Mirroring RSPAN(Remote mirroring) |
|||||
IEEEE802.1d(STP) IEEEE802.1w(RSTP) IEEEE802.1s(MSTP) Root Guard BPDU Guard BPDU Tunnel |
|||||
802.1Q, 4K VLAN, VLAN-trunking, Hybrid VLAN MAC VLAN, Voice VLAN, PVLAN(Private VLAN), Protocol VLAN, Multicast VLAN QinQ, Flexible QinQ GVRP N:1 VLAN Translation Broadcast / Multicast / Unicast Storm Control |
|||||
IGMP v1/v2/v3 Snooping and L2 QueryND SnoopingMLDv1/v2 Snooping | |||||
Port Security. MAC limit |
|||||
Flow Control: HOL, IEEE802.3xBandwidth Control | |||||
L3 Features | Static Routing, RIPv1/v2, OSPFv2, BGP4OSPFv3, BGP4+OSPF multiple processesLPM RoutingPolicy-based routing (PBR) for IPv4 and IPv6VRRPURPF,ECMPBFD | ||||
IGMP v1/v2/v3, IGMP Proxy,Static Multicast RouteMulticast Receive ControlIllegal Multicast Source Detect | |||||
ARP Guard, Local ARP proxy, Proxy ARP, ARP Binding, Gratuitous ARP, ARP LimitAnti ARP Cheat, Anti ARP Scan | |||||
DNS Client, DNS Relay | |||||
GRE Tunnel | |||||
IPv6 | 6to4 Tunnel, Configured Tunnel, ISATAP Tunnel, GRE TunnelICMPv6, ND, DNSv6IPv6 LPM Routing, IPv6 Policy-based Routing (PBR)IPv6 VRRPv3, IPv6 URPF, IPv6 RARIPng, OSPFv3, BGP4+MLD Snooping, IPv6 Multicast VLANMLDv1/v2, IPv6 Anycast RP, IPv6 ACL, IPv6 QoS | ||||
QoS | 8 QueuesSWRR(SP+WRR), SP, WRR, WDRR, SWDRR(SP+WDRR)Traffic Classification Based on 802.1p COS, ToS, DiffServ DSCP, ACL, port numberTraffic PolicingPRI Mark/Remark | ||||
ACL | IP ACL, MAC ACL, IP-MAC ACLStandard and Expanded ACL Based on source/destination IP or MAC, IP Protocol, TCP/UDP port, DSCP, ToS, IP Precedence), VLAN, Tag/Untag, CoSRedirect and statisticsRules can be configured to port, VLAN, VLAN routing interfacesTime Ranged ACLACL rules and policy can be configured to port, VLAN | ||||
Security | 802.1x AAAPort, MAC-based authenticationAccounting based on time length and trafficGuest VLAN and auto VLAN | ||||
RADIUS for IPv4 and IPv6 | |||||
TACACS+ for IPv4 and IPv6 | |||||
MAB | |||||
CPU Protection,DoS Attack prevention,IP/MAC Spoofing,DHCP Request Flood,ICMP Attack Protection | |||||
DHCPv4/v6Traffic Monitor | DHCP Server/Client for IPv4/IPv6DHCP Relay/Option 82DHCP Snooping/Option 82 | ||||
Traffic Monitor | sFlow Traffic Analysis | ||||
Security Network Management | CLI, WEB, Telnet, SNMPv1/v2c/v3 through IPv4 and IPv6Syslog and external Syslog ServerHTTP SSLSNMP MIB, SNMP TRAPFTP/TFTPSNTP/NTPRMON 1,2,3,9Authentication by Radius/TACACSSSH v1/v2Dual firmware images/ Configuration files802.3ah OAM, 802.1ag OAM | ||||
Data Center Features | VSF (Virtual Switch Framework)IEEE 802.3az |
The contents marked with "*" need a future upgrade or are under development
Order Information
Product |
Description |
S5750E-16F-SI-D | 10G Ethernet Routing Switch, 8 x 100/1000Base-X (SFP) + 4 x GE Combo (RJ45/SFP) + 4 x 10GbE (SFP+), AC + 48V DC power supply,Warranty can be exceeded to 5 years |
S5750E-28F-SI-D | 10G Ethernet Routing Switch, 16 x 100/1000Base-X (SFP) + 8 x GE Combo (RJ45/SFP) + 4 x 10GbE (SFP+), AC + 48V DC power supply,Warranty can be exceeded to 5 years |
S5750E-52F-SI-D | 10G Ethernet Routing Switch, 48 x 100/1000Base-X (SFP) + 4 x 10GbE (SFP+), AC + 48V DC power supply,Warranty can be exceeded to 5 years |
Application
S5750E series fiber switches are deployed as Access switch with 10G uplink in FTTH network.