Use: | Servers |
---|---|
Certification: | CE, RoHS, FCC |
Power: | 500-800W |
ATX Standard: | Crps |
Fan Type: | 12cm |
Fan Size: | ≤8" |
Customization: |
---|
Suppliers with verified business licenses
This power supply has a total power of 550W, supports N+1 (3≥N≥0) and hot-swap applications, and has I 2C/PMBus functionality via CCC,
CE, FCC, UL certified, compliant with EU RoHS directive.
1 AC input characteristics | ||||
1.1 Input voltage and frequency range | ||||
Allow input | Rated input | MIN | NOM | MAX |
Voltage (AC) | 100-240V~ | 90 | 100-240 | 264 |
Frequency(Hz) | 47 | 50 | 63 | |
Voltage (DC) | 240Vdc | 190 | 240 | 310 |
1.2 Steady-state current | ||||
When the AC input voltage is 100V, the input current is ≤7A. | ||||
When the AC input voltage is 240V, the input current is ≤3.5A. | ||||
When the DC input voltage is 240V, the input current is ≤3.5A. | ||||
1.3 Inrush current (cold start) | ||||
Within the input conditions listed in Section 1.1 and the operating environment range listed in Section 3, the surge current should be less than the rated rating of key components. | ||||
value (such as rectifier bridge, fuse). Repeatedly turning the power on and off will not cause damage to the power supply or blown fuse. | ||||
When the ambient temperature is 25°C, the output is no-load,single moduleUnder cold start conditions: less than 25A when the AC input is 220Vac. | ||||
The surge current caused by the X capacitor and Y capacitor is not included. | ||||
1.4 Power factor (single module) | ||||
AC input voltage is 230V/50HZ | ||||
load | THDi | PF | ||
10% | <15% | >0.90 | ||
20% | <10%* | >0.96 | ||
50% | ≤5%* | >0.98 | ||
100% | ≤5%* | >0.99 | ||
2 DC output characteristics | ||||
2.1 DC output voltage range | ||||
nominal value | Vmin | Vnom | Vmax | error |
+12V | +11.40V | +12.00V | +12.6V | ±5% |
+12VSB | +11.40V | +12.00V | +12.6V | ±5% |
2.2 DC output current range | ||||
DC output | Output current (A) | |||
aisle | MIN | NOM | MAX | |
+12V | 1 | 45 | ||
+12VSB | 0 | 3 | ||
2.3 Dynamic load | ||||
Frequency Range:50Hz-5KHz | ||||
Voltage | step load | Load change rate | capacitive load | |
+12V | 60%maximum load | 0.25A/µS | 2000µF | |
+12VSB | 1.0A | 0.25A/s | 20F | |
Note: +12V minimum load1A | ||||
2.4 Ripple and noise | ||||
DC output channel | +12V | +12VSB | ||
Ripple and Noise (mVp-p) | 120mV | 120mV |
Suppliers with verified business licenses