Product introduction
Product overview
S2600P-16F-1G-1TC is gigabit RJ45 and SFP uplink unmanaged PoE switch independently developed by hasivo, which
can automatically detect the compliance with IEEE802.3af/at | PoE +| HiPoE standard power receiving equipment and
power supply, new integrated hipoe and poedog function, solve the power supply problem of high-power outdoor ball
machine, high-power wireless AP and other high-power equipment, pogdog function will realize the automatic repair of
PD end equipment when it accidentally crashes, solve the time-consuming and labor-consuming problem of human
operation, and realize intelligent unattended.
Port performance
Provide 16*10/100M PoE RJ45 adaptive ports, all of which can realize line speed forwarding.
Provide 1 gigabit RJ45 and 1 COMBO uplink ports for high-speed uplink transmission.
Each port supports MDI / mdix auto flip and duplex / rate self negotiation.
Support IEEE 802.3x full duplex flow control and backpressure half duplex flow control.
PoE power supply function
According to IEEE 802.3af/at PoE power supply standard, the maximum PoE output power of the whole machine is
150W/300W, single port for the maximum PoE output power is 30W.(1~2 port supports HiPoE_60W).
Automatic identification of PoE equipment for power supply without damaging non PoE equipment.
PoE port supports priority mechanism. When the residual power is insufficient, priority is given to the power supply of
high priority port to avoid equipment overload.
Three working modes
N--standard switching mode: all ports communicate freely, suitable for common data transmission environment.
V--port isolation mode: the downlink ports are isolated from each other, which is suitable for the use scenarios of
connecting wireless AP, suppressing network storm and improving network performance.
S--flow control mode: port flow balance control, prevent big data flow packet loss, ensure the efficient and stable
operation of user network.
Special function
HiPoE: the 1~2 port outputs 60W to solve the power supply problem of high-power PD. It can connect large ball
machine, wireless AP or intelligent door lock and other high-power PoE devices.
PoEdog: when PoE is started, it detects the status of PoE electrical equipment in real time; when the equipment side is
abnormal, the switch actively sets the port and restores PoE power supply to realize unattended.When the function
switch dial back and forth between N-S (< 1.5s), the poe watchdog function can be turned on / off.
Model |
S2600P-16F-1G-1TC-150W |
Product |
Hybrid Gigabit Uplink 16+2+1 Ai PoE Switch |
Fixed Port |
16*10/100Base-TX PoE port (Data/Power)
1*10/100/1000Base-TX uplink RJ45 port (Data)
1*1000M COMBO |
PoE Ports |
1-16 port supports PoE(first port supports HiPoE_60W) |
Function |
N:(Standard normal)
V:(Port Isolation)
S:(Super mode) (specific port refers to user manual)
Ai version:PoE auto execution, detection and resets fault device,when PoE is on |
PoE Standard |
Port 3-16 support IEEE802.3af/at
Port 1-2 support IEEE802.3af/at/PoE++/HiPoE |
Network Protocol |
IEEE 802.3
IEEE 802.3i 10BASE-T
IEEE 802.3u 100BASE-TX
IEEE 802.3ab1000BASE-T
IEEE 802.3z 1000BASE-X
IEEE 802.3x |
Port Specification |
10/100/1000BaseT (X) Auto |
Power Pin |
Default 1/2(+),3/6(-); Optional order4/5(+), 7/8(-) |
Single port power |
15.4W/30W(1-2 port output MAX 60W) |
Total power |
MAX 150W/300W/Ultral long-distance optional |
Transmission Mode |
Store and Forward(full wirespeed) |
Bandwidth |
20Gbps |
Packet Forwarding |
9.2Mpps |
MAC Address |
8K |
Buffer |
4M |
Transmission Distance |
10BASE-T:Cat3,4,5 UTP(≤250 meter)
100BASE-TX: Cat5 or later UTP(≤100 meter)
1000BASE-TX: Cat6 or later UTP(≤1000 meter)
1000BASE-SX:62.5μm/50μm MMF(2m~550m)
1000BASE-LX:62.5μm/50μm MM(2m~550m) or 10μm SMF(2m~5000m) |
Watt |
Standby Power Consumption: ≤8W |
LED Indicator |
POWER:Power LED(over-power LED)
18:(SFP LED)
S:(Super mode LED)
Uplink port:(Orange=1000M,Green=10/100M)
Downlink port:(Orange=PoE LED,Green=Link LED) |
Power Input |
Built-in power AC:100~240V 50-60Hz 2.1A/4.2A |
Operating
Temperature/Humidity |
-10~+55ºC; 5%~90% RH Non coagulation |
Storage
Temperature/Humidity |
-40~+75ºC; 5%~95% RH Non coagulation |
Product size/Packing size
(L*W*H) |
295mm*195mm*45mm
410mm*275mm*95mm |
N.W/G.W (kg) |
1.6kg/2.4kg |
Installation |
Rack-mount(optional machine hanger spare parts) |
Lightning protection level |
3KV 8/20us;
IP30 |
Certificate |
3C;
CE mark,commercial; CE/LVD EN60950;
FCC Part 15 Class B; RoHS; |
Warranty |
Whole device for 1 year(Accessories not included) |