| Customization: | Available |
|---|---|
| Communication Mode: | Full-Duplex & Half-Duplex |
| Type: | Ethernet Switch |
Suppliers with verified business licenses
Place the PoE repeater between the PSE(eg. 95W PoE injectors) and the PD(eg. PoE cameras), achieving Ethernet signal boosting, you can easily break PoE distance limit with plug-and-play, even at harsh outdoors due to its distinguished waterproof and rugged design.
Outdoor 2 port 802.3bt Gigabit PoE extender is useful PoE cable extender, which helps repeat power and data in the same cable when encounter dilemma of max PoE distance of 100 meters(328 ft.) in IP cameras deployment. It also can be a LAN extender if to extend Ethernet only by adding a PoE splitter.
Using PoE repeater is a low-cost solution for challenged applications that requires long-distance runs, you can apply to common PoE devices, such as PoE cameras, desktop phones, Wi-Fi access points, etc. The integration is safe without breaking IEEE 802.3 standard and affecting the data transmission performance.
The aluminum IK10 vandal proof housing and IP67 waterproof design allow the PoE ethernet extender to stably operate under outdoor harsh environment and obtain a longer use life. It is able to be directly buried under the ground.
The PoE extender supports 60W IEEE802.3bt standard, so it is capable of supplying a maximum of 30W output for single port and extending it for 100m over single Ethernet cable (Cat5, Cat5e, Cat6). Daisy chaining 4 units, the PoE booster can reach a maximum PoE distance of up to 500m (1640 ft.), and 1000Mbps gigabit transmission is available.
PoE powered Ethernet extender features easy installation with no requirement of extra power supply as the power is received from the PSE over Cat5e/Cat6. Equipped with two PoE out ports, only one PoE cable is needed if demand for supporting 2 remote IP devices. The PoE extender adopts convenient wall mountable design for installation flexibility.
Product Benefit
|
Model |
PSE3002GP-W |
|
Standard |
IEEE802.3, IEEE802.3u, IEEE802.3ab, , IEEE802.3x, IEEE802.3af, IEEE802.3at, IEEE802.3bt |
|
Port |
PoE in port:1 x 10/100/1000Mbps RJ45 port PoE out port : 2 x 10/100/1000Mbps RJ45 port |
|
Network Media(Cable) |
10BASE-T: UTP category 3, 4, 5 cable (≤100m) 100BASE-TX: UTP category 5, 5e cable (≤100m) 1000BASE-TX: UTP category5e cable (≤100m) |
|
LED |
LAN |
|
PoE Standard |
IEEE802.3af/at/bt |
|
Dimensions (L*W*H) |
150*73*44MM |
|
RJ45 PoE |
PoE in port: Anode1/2 Cathode3/6 or Anode4/5 Cathode7/8 PoE out port: Anode1/2 Cathode3/6 |
|
PoE port |
2 |
|
Power Supply |
PoE |
|
PD port input |
95W Max |
|
PoE Power Output |
Per port 48-55V DC Max.30W |
|
Operating Temperature |
-20°C ~ 60 °C |
|
Storage Temperature |
-40 °C ~ 80 °C |
|
Operating Humidity |
10% ~ 90% non-condensing |
|
Storage Humidity |
5% ~ 90% non-condensing |
|
Surge Protection |
Differential mode±4KV, Common mode±6KV |
|
MTBF |
>50000 hour |
|
Electrostatic standard |
Contact 6KV, air 8KV |
|
Weather Rating |
IP67 |
|
Vandal Proof |
IK10 |
){kind=link}