Customization: | Available |
---|---|
Communication Mode: | Full-Duplex & Half-Duplex |
Type: | Optical Switch |
Still deciding? Get samples of US$ 90/Piece
Request Sample
|
Suppliers with verified business licenses
The ES3005FX-P is the unmanaged industrial grade PoE switch with 4-port 10/100Base-TX PoE and 1-port 100Base-FX fiber optical interfaces. It complies with IEEE802.3af, IEEE802.3at standard PoE protocol, the Max power consumption can reach 30W (PoE+) per port. Moreover, it is featuring with port isolation, 250m long distance transmission mode(1-4 ports), QoS(1-2 ports) and PoE watchdog function, which all can be configured by the Dip switch on the top panel.
ES3005FX-P is also a high cost-effective easy-to-use device, which provides essential industrial Ethernet networking function, such as wide range power input 44-57VDC, redundant power design with polarity reverse/over-voltage protection, robust IP40 fan-less housing with Din-rail installation, wide operation temperature from -40ºC ~+75ºC as well as high-level EMI/EMC capability and so on. It is the best choice for heavy industrial factory, transportation, oil & gas, chemical, IP Surveillance and processing automation area where environmental conditions exceed commercial product specifications.
Features
* 4*10/100Base-TX RJ45 PoE ports, 2*100Base-FX SFP fiber ports
* DC 44~57V input, redundant power supply with polarity reverse/over-voltage protection
* Complies with IEEE802.3af PoE and IEEE802.3at PoE+ standard
* Dip switch function: 1.Port isolation; 2. 250m long distance; 3. QoS; 4.PoE watchdog
* Support 9K Bytes Jumbo frame
* Support 4KV surge protection and ESD: Air-15kV, Contact-8kV Protection
*IP40 fan-less and Din-rail hardware design
* Operation temperature: -40 ºC ~+75ºC
Model No. |
ES3005FX-P |
|||
Interface |
Fiber ports |
Copper RJ45 ports |
||
2 |
4 |
|||
Ethernet |
4*10/100Base-TX PoE 1*100Base-FX SFP |
|||
Standard |
IEEE 802.310Base-TEthernet IEEE 802.3u Fast Ethernet IEEE 802.3x Full-Duplex Flow Control IEEE 802.3az Energy Efficient Ethernet IEEE 802.3af Power-Over-Ethernet IEEE 802.3at Power Over Ethernet plus PSE |
|||
Dip Switch |
1. Port Isolation 2. 250m long distance mode(1-4 ports) 3. QoS(1-2 ports) 4. PoE watchdog |
|||
LED Indicators |
P(Power indicator)Green |
Off: the device is power off or failed |
||
On: the device power on is normal |
||||
S(PoE usage indicator)Red |
Off: total PoE usage |
|||
Blinking: rated 50% |
||||
On: total PoE usage≥rated 90% |
||||
1-4(Copper ports) |
Green indicators |
Yellow indicators |
||
Off: ports link down |
Off: PoE not working |
|||
On: ports link up |
On: PoE working |
|||
Blinking:data on TX/RX |
||||
5 ( Fiber ports)Green |
Off: ports link down |
|||
On: ports link up |
||||
Blinking:data on TX/RX |
||||
Power parameters |
||||
Input voltage |
44-57VDC, redundant power input |
|||
Input current |
3A Max |
|||
Total power consumption |
Full loading without PoE ≤3W PoE power budget ≤ 120W |
|||
Connector |
Removable 4-pin terminal block |
|||
Reverse polarity protection |
Support |
|||
Over-voltage protection |
Support |
|||
Switching features |
||||
Switching capacity |
1G |
|||
Packet forwarding rate |
1.48 Mpps |
|||
MAC address table |
2K |
|||
VLAN |
2K |
|||
Buffer |
2Kbits |
|||
Forwarding delay |
<100us |
|||
Jumbo Frame |
Support 9Kbytes |
|||
MDX/MIDX |
Support |
|||
Watchdog |
Support |
|||
Network Topology |
||||
Star topology |
Support |
|||
Bus topology |
Support |
|||
Tree Topology |
Support |
|||
Mechanical structure |
||||
Case protection |
IP40 |
|||
Installation method |
Din-rail |
|||
Dimension(W*D*H)mm |
30*98*130mm |
|||
Weight |
0.56 kg |
|||
Operating environment |
||||
Operating temperature |
-40ºC~+75ºC |
|||
Storage/transportation temperature |
-40ºC~+85ºC |
|||
Relative humidity |
5%~95%(non-condensing) |
|||
Industrial Standard |
Surge protection of power: IEC 61000-4-5 Level 3 (4KV/2KV)(8/20us) |
|||
Surge protection of Ethernet ports: IEC 61000-4-5 Level 3 (4KV/2KV)(10/700us) |
||||
DIP: IEC 61000-4-11 Level 3(10V) |
||||
ESD: IEC 61000-4-2 Level 4(8K/15K) |
||||
Shock:IEC 60068-2-27 |
||||
Free fall:IEC 60068-2-32 |
||||
Vibration:IEC 60068-2-6 |
||||
Certification |
CCC/CE/FCC/RoHS |
|||
Warranty |
5 years |
CCC/CE/FCC/RoHS
5 YEAR Warrenty