| Customization: | Available |
|---|---|
| Type: | Access Point |
| Work Mode: | AP |
Suppliers with verified business licenses
Multicolor panel decals make the AP go well with the installation environment.
The standard 86 mm x 86 mm design and elegant appearance make the AP go well with various interior decoration.
The AP intelligently enables the wireless clients to connect to 5 GHz wireless network in priority, ensuring load balancing at dual bands and improving the wireless performance.
With the independent RF chip, the AP separates the power supply part and WiFi signal processing part, completely avoiding the interference of the power magnetic field on the WiFi signal. Boosted by the high-performance antenna, the AP can cover two side-by-side hotel rooms with full WiFi.
The AP can be powered by the PoE devices. With an Ethernet cable, the AP can be powered and transmit data at the same time. The maximum power supply distance of up to 100 meters enables the AP to be installed easily in hotels or your houses without breaking the existing power line layout.
The AP supports the unified management and configuration of ACs and enterprise routers, enabling the network administrators to manage, configure and monitor all APs conveniently.
| Product Information | |
|---|---|
| Product Model | W36AP |
| Product Appearance | In-wall access point |
| Product Dimension | 86 x 86 x 32 mm |
| Application Scenarios | WiFi coverage for large-sized apartments/villas/hotel rooms |
| Hardware Specifications | |
| Working Frequency Band | 2.400 - 2.4835 GHz, 5.15 0 - 5.250 GHz |
| Wireless Protocol Standard | IEEE 802.11a/b/g/n/ac |
| 2.4 GHz Access Rate | 1-300Mbps |
| 5 GHz Access Rate | 6-867Mbps |
| 2.4 GHz Maximum Connections | 128 |
| 5 GHz Maximum Connections | 128 |
| Ethernet Port | 2 10/100/1000 Base TX ports |
| Reset Button | 1 reset button |
| LED Indicators | 1 x SYS LED indicator and 1 x LAN LED indicator |
| Power Consumption of the Whole Device | Full load 7.8 W |
| Power Supply Mode | IEEE 802.3af |
| 2.4 GHz Antenna Gain | 4 dBi |
| 5 GHz Antenna Gain | 4 dBi |
| 2.4 GHz Output Power | 20+/-1.5 dBm |
| 5 GHz Output Power | 16+/-1.5 dBm |
| 11b 1 Mbps Received Sensitivity | -95 dBm |
| 11n MCS7 Received Sensitivity | -73 dBm |
| 11a 6 Mbps Received Sensitivity | -93 dBm |
| 11ac MCS7 Received Sensitivity | -75 dBm |
| Software Specifications | |
| Operating Mode | AP, Client + AP |
| SSID Hide | Supported |
| 2.4 GHz SSID Number | 8 |
| 5 GHz SSID Number | 4 |
| Chinese SSID | Supported |
| WEP | 64/128 bit encryption supported |
| WPA-PSK | AES/TKIP |
| WPA2-PSK | AES/TKIP |
| WPA | Supported |
| WPA2 | Supported |
| Wireless Access Control | MAC address-based filtering supported |
| TX Power Adjustment | Supported |
| SSID Isolation | Supported |
| AP Isolation | Supported |
| Wireless User Access Limit | Supported |
| Weak Signal Client Access Limit | Supported |
| WMM | Supported |
| 5 GHz Band Navigation (5 GHz Priority) | Supported |
| Multicast to Unicast | Supported |
| Detection Broadcast Message Reply Inhibition | Supported |
| Access Control | Supported |
| VLAN and SSID Binding | Supported |
| LED Control | Supported |
| Diagnostic Tool | ping |
| Timed Reboot | Supported |
| Cyclic Reboot | Supported |
| Device Management | Web management |
| Uplink Detection | Supported |
| Hardware Watchdog | Supported |
| Remote Log Management | Supported |
| Logs | System log |
| Firmware Upgrade | Local upgrade and upgraded by AC |
| Reboot | Local reboot and rebooted by AC |
| Reset | Local reset and reset by AC |
| Backup | Supported |
| Restore | Supported |
| AC Management | AC1000/AC2000/AC3000 supported |
| Working Environment | |
| Default Login IP Address | 192.168.0.254 |
| Default User Name | admin |
| Default User Name | admin |
| Operating Temperature | -10°C to 45°C |
| Operating Humidity | 10% - 90% RH (non-condensing) |
| Storage Temperature | -30°C to 70°C |
| Storage Humidity | 10% - 90% RH (non-condensing) |
){kind=link}