Aluminium Alloy 8-Channel Gigabit Poe Network Surge Arrester/Lighting Protector

• Customization: Available
• Type: Power and Signal Arrester
• Structure: Valve Type Arrester
• Model NO.: OMS-RJ45POE-1000-8
• Installation: Screw Fixation
• Application: Poe Network
• Size: Small
• Operation Voltage: Low Voltage
• Shape: Cuboid
• Material: Aluminium Alloy
• Certification: ROHS
• Brand: OEM
• Transport Package: Box
• Specification: 250*100*60
• Trademark: OEM
• Origin: China
• HS Code: 8517623200
• Production Capacity: 500pics/Mon

Product Description

OMS-RJ45/POE/1000/8 8-channel Gigabit POE network surge arrester
/lighting protector

There are many models to choose,please contact me for more product information.

Eight channel 1000M POE network lightning arresters (Gigabit POE lightning arresters and Ethernet-powered lightning arresters) are designed and manufactured according to IEC and GB standards and meet the requirements of IEEE802.3AT High-quality surge protection devices with high discharge capacity, ultra-low junction capacitance ultra-fast recovery diode matrix structure and network filters are adopted to provide high-energy coarse protection and low-energy fine protection for data lines. It is suitable for surge protection of communication equipment such as servers, wireless AP, network cameras, network switches, etc., which use CAT.6 of network cables to transmit power and network signals at the same time, with integrated design and convenient installation.
technical parameter

product name	8-CH Gigabit POE network lightning arrester
model	OMPS-RJ45/POE/1000/8
SPD category	compound
SPD function	It has the functions of overvoltage, overheating and overcurrent protection.
Transmission mode	Simultaneous transmission of DC power supply and network signals
Line category	Power Supply	network
Nominal operating voltage Un	DC48V	5V
Maximum continuous operating voltage Uc	60V	8V
Nominal current capacity in	3kA(8/20µs)	3KA(8/20µs)
	10/700µs 6KV	10/700µs 6KV
Protection level up (10/700s, 3KA)	X-X ≤100V	X-X≤15V
	X-PG ≤350V	X-PG ≤350V
Maximum data transmission rate Vs	---	1000Mbps
Insertion loss Ae	---	≤0.2dB
Interface form (protection pin)	Rj45(4,5,7,8)	Rj45(1/2,3/6)
shell	Powder spraying of aluminum alloy/steel plate
Installation and fixing mode	Screw-fixed series installation
Applicable environment	Temperature-40 ~+85ºC, relative humidity ≤ 95% (25ºC)

Features of gigabit POE network lightning arrester;
1. The composite symmetrical secondary protection circuit is adopted, which has full protection of coarse and fine, low residual voltage level and good protection effect;
2. The core components are international famous brand products with excellent performance;
3, metal shielding shell, excellent performance;
4. Adopt two-in-one integrated design;
5, clutter isolation, minimal insertion loss and superior transmission performance;
6, rapid response, stable performance and reliable work;
7. One-CH, four-CH, eight-way, 16-CH and 24-CH can be selected, which is small in size, convenient to install and use, and does not need special maintenance for lightning arrester installation guidance:
1. The POE network lightning arrester powered by Gigabit Ethernet can be installed in LPZ0-1 area or directly installed in series at the front end of the protected equipment (or system), and the closer it is to the protected equipment (or system), the better.
2. The input end (IN) of the lightning arrester is connected with the signal line, and the output end (OUT) is connected with the protected equipment, which cannot be reversed.
3. The PE line of lightning protection device must be strictly equipotentially connected with the lightning protection system, otherwise it will affect the working performance.
4. This product does not need special maintenance, and it should be installed as close as possible to the equipment side; When the working system fails and the lightning arrester is suspected, the lightning arrester can be removed and then checked. If it returns to normal after being restored to the state before use, the lightning arrester should be replaced.
5, lightning arrester grounding exhausted the shortest possible line connection. The lightning arrester is grounded by terminal, and the grounding wire must be connected with the lightning protection grounding wire (or the shell of the protected equipment). The shielded wire of the signal can be directly connected to the grounding terminal.
6. The lightning arrester does not need long-term maintenance when it is installed under the condition that it does not exceed the requirements, but only needs routine maintenance of the system; If there is a problem in signal transmission during use, the signal transmission will return to normal after replacing the lightning arrester, which means that the lightning arrester has been damaged and needs to be repaired or replaced.